Connection 6 is connected to the positive pole of the
battery and connection 7 to negative vehicle ground.
The control of the THb 210A should ideally be a twochannel
control, either via the preamplifi er outputs or the
loudspeaker outputs of the car sound system. A control
solely via the right or left channel is also possible since the
low-frequency portion of the music is generally identical
on both channels.
The preamplifi er outputs are connected to the cinch (RCA)
sockets of the woofer box via a shielded sound cable.
To connect the device, we explicitly recommend the use of
the original Blaupunkt RCA cable 7 607 885 093 (1.3 m) or
7 607 886 093 (5 m).
With control via the loudspeaker outputs, the input connections
of pos. 9/: are fed to the closest loudspeaker
cables (front or rear) on the left and right. They are separated
and connected to the input connections. The polarity
of the + or - connections must be observed. Bridge output
stages (BTL) can also be connected directly without an
additional adapter.
... asa scrie aici !