calculator de bord

[Ansi]

Voi aţi văzut pe undeva prin ţară calculatoare de bord, care să se poată monta la matiz? ceva de venul ... "KEL Car Trip Computer" de pe http://matiz.uragan.cz/kel.php. Ar fi foarte interesant aşa ceva nu ?ai o tonă de informaţii. Am văzut că sunt fabricate în Polonia... numai că nu vând la persoane individuale. Nici preţ nu am găsit la ele

[Indigo]

Am scris producatorului privind informatii de pret si ce ofera produsul lor. Raspunsul se poate vedea mai jos:

 

ref. fuel consumption meters for EFI engines.

 

Dear Sir

 

The unit SINGLE prices are (including charges and cost of shipment):

Common Rail diesel engines:

* fuel consumption meter: USD149 (12V or 24V installations);

* fuel computer: USD199 (12V installation only);

 

Car Trip Computers (multipoint EFI engines):

* fluorescent display: USD129;

* liquid crystal display: USD149;

 

Sport Version of Car Trip Computer (every kind of engines)

* fluorescent display: USD129;

 

KELectronics, Piotrkowska 1/410 st.

45-316 Opole, POLAND

email: kel@kel.mtl.pl

 

Below You can find description of products for cars and trucks.

Passenger cars equipment

We offer car trip computers featuring fuel consumption measurement and travel plan programming. These devices come in compact sizes, are easy to use and assemble. Installation of this device adds new useful features to the vehicle and makes it easier to use. Many of the readings allow the driver to estimate fuel economy in different conditions of road traffic or on different routes. Also it allows to develop the driving style that is the most economical.

Additionally, thanks to the readings associated with the travel plan programming these devices make it possible to drive economically and safely during trips. Also it have the reading that shows the distance remaining to the next scheduled maintenance, therefore it is easier to conduct service on time (such as oil level check, tire pressure, etc.). Thanks to the fact that the devices are adjustable they can work at many different vehicle types with gasoline injection (EFI) or Common Rail (i.e. HDi, CDi, JTd, dCi, TdCi) type engines.

 

Devices have the fuel consumption related readings: current fuel consumption (when stationary gives value in litres or gallons per hour, when running in litres per 100km or miles per gallon) - lets know about fuel flow value at current traffic conditions, change of conditions (for ex. gear change, speed increase, etc.) affects to flow value - this enables to drive more economically;

average fuel consumption at defined distance (in l/100km or m/gallon) - lets testing how economical is your driving style;

fuel used measured since the last reset (in litres or gallons);

fuel remaining in the tank (in litres or gallons, requires entering capacity of the tank) - have bigger accuracy than vehicle fuel level indicator; Readings related to distance and time: distance available at the amount of fuel remaining in the tank (in km or miles) - predicts how far You can go;

odometer (in km or miles) - gives distance traveled since the last reset of the reading;

time in traffic (in hour and minutes) - gives value since the last reset of the reading;

average speed at defined distance (in km/hour or miles/hour) - lets see how traffic conditions affects to driving style; Additionally devices calculates readings for trip planning and car maintenance scheduling, such as: trip distance (in km or miles, requires entering of the intended trip distance) - allows read remaining/traveled distance at any time;

trip time (in hours and minutes, requires entering of the intended trip duration) - allows read remaining/traveled time at any time;

ride time to the destination (in hours and minutes) - lets know how long yours trip lasts (not counting any stopovers), takeing into consideration current traffic conditions;

suggested speed which allows reaching the destination of the trip in the previously entered time (in km/hour or miles/hour) - gives optimal speed, which can be hold at the journey;

remaining distance to the service inspection of the vehicle (in km or miles, requires entering initial distance to the next service inspection) - lets take care of your car's technical condition much better;

The devices are designed to work with gasoline injection (EFI) or Common Rail type engines. Additional functional features makes possible application at the engines propelled with the LPG fuel. The devices supports metric (l/100km) or imperial (mpg) unit system. They are offered in version with red or green fluorescent display or liquid crystal display (with green backlight). Usage and installation is the same for both versions. Devices are easily mountable on the vehicle dashboard (for ex. by sticking) and have the following dimensions (height x width x depth): fluorescent display - 48 x 38 x 13mm (1.9" x 1.5" x 0.5"), liquid crystal display - 80 x 40 x 20mm (3.1" x 1.6" x 0.8").

 

A person, who has knowledge about vehicle electrical installation, will be able to simply hook-up this device. No modifications of the original car circuits are needed, therefore, for ex., the manufacturer’s guarantee would not be void when device is installed. Connections to the following points of the vehicle’s electrical installation are required (four wires):

power from the battery and ground;

injection's valve steering signal - at the multipoint injection connection to one of the valves (does no matter to which), in case of LPG connection to the same signal, but from the ECU side (i.e. before disconnecting switch);

distance traveled signal (tacho) - in modern cars signal from the speed sensor can be used, in older models a sensor included with the device should be installed inside the speedometer; Technical specifications of the device:

current fuel consumption range

total fuel consumption range

traveled distance range

timer range

fuel consumption increment

distance increment

time increment

fuel measurement error

power supply up to 250 liters/gallons per hour or 100 km/miles;

up to 1000 liters/gallons;

up to 10,000 km/miles;

up to 100 hours;

0.1 of a liter/gallon;

1 km/mile;

1 minute;

under 2%;

12V; Car test equipment

For precise measurement of fuel consumption - the accuracy of the fuel consumption reading is 0.001 litres/gallons, it makes possible to measure fuel consumption during maneuvers (pulling out, overtaking), measuring an average consumption after a 1km/mile of traveled way; additional feature allows measuring performance characteristics of the engine during roll-ons - for ex. 60-100 km/hour (or mph) on fourth gear or 80-120 km/hour (or mph) on fifth gear; connection is done without any interference to the fuel system - only power from battery and a terminal for injection's valve steering signal are required;

 

this product is for EFI engines only;

 

For injection parameters reading - it makes possible measurement of the injection valve steering signal parameters such as: injection duration (in ms), fills of the course (in %), injection signal frequency (in Hz), engine rotational speed (in rev/minute), current fuel consumption (in litres/gallons per hour) and total fuel consumption counted since the last reset (in litres/gallons); connection - same as for "precise measurement" version;

 

this product is for EFI engines only; Sport cars equipment Sport version of car trip computer - it has a hald (distance measuring with 10m/0.01mile increment accuracy), enables measurement performance characteristics of the car, for ex. acceleration from 0 to 100km or miles (thresholds are fully adjustable), roll-ons (for ex. 80-120km/miles, adjustable), brakes efficiency (distance required to stop the vehicle), also tachometer, speedometer and additional way and time counters with programmable features; connection of the device as trip computer (four wires) - instead injection valve connection to ignition coil must be carry out. Therefore this device can work with every car, as well with carburettor engine. This version don't allows measuring of fuel consumption.

 

this product is for every kind of engines;

Fuel measuring equipment

We offer fuel consumption meter for vehicles equipped with Common Rail diesel engine, enables to control amount of fuel used. Those device is useful for users, which don't need to follow how traffic conditions or load status affects to fuel consumption value (instant or average). Available data are accessible at any time but only trip/daily values can be reset as desired. Non-resetable values can't be cleared, for ex., by the staff. All of data are retained in the memory in case of power disconnecting.

 

This device provides following readings:

non-resetable value of fuel used;

non-resetable value of engine hours;

resetable (e.g. trip/daily) value of fuel used;

resetable (e.g. trip/daily) value of engine hours;

 

Connection to the power and signal from injection valve is required; not requires connection to vehicle speed transducer.

 

 

The next product is the fuel computer (also for trucks with Common Rail diesel engine), which makes possible following how driving habits or traffic condition affects to fuel consumption. Also it allows to develop the driving style that is the most economical.

 

This device features as fuel consumption meter plus additional readings:

average fuel consumption at defined distance;

average speed at defined distance;

fuel remaining at the tank;

predicted range of the vehicle;

current fuel consumption;

 

Connection to the power and signals from injection valve and vehicle speed transducer is required.

 

 

 

 

KELectronics, Piotrkowska 1/410 st., 45-316 Opole, POLAND

email: kel@kel.mtl.pl

[cchrism]

Daca scoate datele prin doar prin ALDL si nu are nevoie de interventii ciudate cred ca as fi si eu interesat de asa ceva. Pentru ce stie, pretul nu mi se pare exagerat de mare.

[vio.p]

nu prea ma pricep cu eng.

ce zice ala in mesaj?

in fine. se poate sau nu? cat costa?

[srvceinf]

Petru matiz cu OBD2 sau orice alta masina cu OBD2 indiferent de protocol recomand

http://www.scangauge.com/

stie sa faca multe si cred ca face banii.

[adrian_r5]

Si pe ce te bazezi cind faci recomandarea asta ? ... pe experianta proprie ?